English 略過巡覽連結
Valmate Industrial Corporation
A Synonym of Professionalism For Valves & Castings
略過巡覽連結
Product Category
略過巡覽連結。
略過巡覽連結 > Home > Product Categorys > Product
Investment Casting
Manufacturing
We are a professional and decades experienced Foundry (investment Casting) with ISO-9002, TRD-100 approved and 10204 3.1B, ASTM, MIL certified from Taiwan. Also, we have established new Foundry with in-house Machining shop in Guangdong Province, China, this huge foundry owns 172,000 square feet plant area, 107,000 square feet for building area, with 300 employees for 200 tons capacity output monthly. The almost about 80% of products have been delivered to USA, Europe and Japan
QC / R&D Department
Quality control checks are performed throughout the casting process from screening the raw materials for stability the concentration of alloy and melted by the US / VIP High / Low-Frequency Induction furnace.
Products
 
* Casting or industrial valves, fittings, pumps
* Propellers, impellers, marine, engine parts
* Turbine, heat exchanger, furnace parts
* Machinery, building, computer parts, housing
* Pneumatic, hydraulic, stamping tools parts
* Auto, vehicle parts, motorycycle parts.
* Medical, sport equipment parts, and artifical joints.
* Flowmeter, instrument parts, thermocouple parts.
Technical Data
The investment casting " Lost Wax " process require an aluminum die. Wax is injected into this aluminum die to produce a pattem that is an exact replica of the part to be produced. For every casting, a wax pattem must be manufactured. The patterns are clusterted around sprue and repeatedly dipped into an agitated vat of ceramic and alloowed to dry. After a shell thickness of approximately 3/8" (5~7 coats) been built; the molds are dewaxed by either flash firing at high heat (1400oF) or autoclaving (pressure and stem).
ProtoType
Valmate has already prepared the advanced 3D CAD/CAM operation system for our customers' inquiries and orders, you can send your castings' drawings with CAD/CAM associated files by E-mail. All of mold and fixture designs have been performed by our professional engineering staffs, they utilize the same as your CAD/CAM system to avoid errors from translation.